Basic form
EXEC SQL.
Addition
... PERFORMING form
Effect
Executes the Native SQL command enclosed by the statements EXEC SQL and ENDEXEC . In contrast to Open SQL , addressed database tables do not have to be known to the ABAP/4.Dictionary and the ABAP/4 program does not have to contain appropriate TABLES statements.
Example
Create the table AVERI_CLNT :
EXEC SQL.
CREATE TABLE AVERI_CLNT (
CLIENT CHAR(3) NOT NULL,
ARG1 CHAR(3) NOT NULL,
ARG2 CHAR(3) NOT NULL,
FUNCTION CHAR(10) NOT NULL,
PRIMARY KEY (CLIENT, ARG1, ARG2)
)
ENDEXEC.
With Native SQL commands, passing data between an ABAP/4 program and the database is achieved using host variables . A host variable is an ABAP/4 variable prefixed by a "*" in the
Native SQL statement.
Example TWO
Display a section of the table AVERI_CLNT :
DATA: F1(3), F2(3), F3(3).
F3 = ' 1 '
EXEC SQL.
SELECT CLIENT, ARG1 INTO :F1, :F2 FROM
AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / F1, F2.
To simplify the spelling of INTO lists in the SELECT command, you can specify a single structure as the target area as in Open SQL .
Example THREE
Display a section of the table AVERI_CLNT :
DATA: BEGIN OF WA,
CLIENT(3), ARG1(3), ARG2(3),
END OF WA.
DATA F3(3).
F3 = ' 1 '
EXEC SQL.
SELECT CLIENT, ARG1 INTO :WA FROM AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / WA-CLIENT, WA-ARG1.
IMPORTANT POINTS
In contrast to Open SQL , a client field in Native SQL is a field like any other and must be specified explicitly in calls.
Authorization checks cannot be properly realized in EXEC SQL . You should perform these in the program.
When you start the R/3 System, a CONNECT to the current database is executed automatically. An explicit CONNECT is unnecessary.
A Native SQL command can (but does not have to) end with a ";". Under no circumstances should it end with a ".".
Some database systems allow upper and lower case in table names and field names. If you want to take advantage of this, you must ensure that the spelling of names is correct. To enable entry of lower case letters in names in the ABAP/4 editor, you must set the attribute for upper/lower case in the report.
Since there are no arrays in ABAP/4 , array operations are not possible in Native SQL . If the result of a SELECT command is a table, you can read this table line by line either with the
Native SQL command FETCH or with the addition ...
PERFORMING form .
Unlike in ABAP/4 programs, the character " in a Native SQL statement does not introduce a comment until the end of the editor line.
Addition
... PERFORMING form
Effect
If the result of a SELECT command is a table, you can read this table line by line in a processing loop. The subroutine form is called once for each line. In this subroutine, you can leave the loop by using EXIT FROM SQL . If the result of the selection is a single record, the subroutine is called only once.
Example
Display a section of the table AVERI_CLNT :
DATA: F1(3), F2(3), F3(3).
F3 = ' 1 '
EXEC SQL PERFORMING WRITE_AVERI_CLNT.
SELECT CLIENT, ARG1 INTO :F1, :F2 FROM
AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
FORM WRITE_AVERI_CLNT.
WRITE: / F1, F2.
ENDFORM.
RELATED POST
SAP ABAP SYNTAX FOR ELSE AND ELSE IF
SAP CRM Technology Overview
Analytical SAP CRm Overview
SAP CRM Solution Monitoring
CRM Backup Restoring System
EXEC SQL.
Addition
... PERFORMING form
Effect
Executes the Native SQL command enclosed by the statements EXEC SQL and ENDEXEC . In contrast to Open SQL , addressed database tables do not have to be known to the ABAP/4.Dictionary and the ABAP/4 program does not have to contain appropriate TABLES statements.
Example
Create the table AVERI_CLNT :
EXEC SQL.
CREATE TABLE AVERI_CLNT (
CLIENT CHAR(3) NOT NULL,
ARG1 CHAR(3) NOT NULL,
ARG2 CHAR(3) NOT NULL,
FUNCTION CHAR(10) NOT NULL,
PRIMARY KEY (CLIENT, ARG1, ARG2)
)
ENDEXEC.
With Native SQL commands, passing data between an ABAP/4 program and the database is achieved using host variables . A host variable is an ABAP/4 variable prefixed by a "*" in the
Native SQL statement.
Example TWO
Display a section of the table AVERI_CLNT :
DATA: F1(3), F2(3), F3(3).
F3 = ' 1 '
EXEC SQL.
SELECT CLIENT, ARG1 INTO :F1, :F2 FROM
AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / F1, F2.
To simplify the spelling of INTO lists in the SELECT command, you can specify a single structure as the target area as in Open SQL .
Example THREE
Display a section of the table AVERI_CLNT :
DATA: BEGIN OF WA,
CLIENT(3), ARG1(3), ARG2(3),
END OF WA.
DATA F3(3).
F3 = ' 1 '
EXEC SQL.
SELECT CLIENT, ARG1 INTO :WA FROM AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
WRITE: / WA-CLIENT, WA-ARG1.
IMPORTANT POINTS
In contrast to Open SQL , a client field in Native SQL is a field like any other and must be specified explicitly in calls.
Authorization checks cannot be properly realized in EXEC SQL . You should perform these in the program.
When you start the R/3 System, a CONNECT to the current database is executed automatically. An explicit CONNECT is unnecessary.
A Native SQL command can (but does not have to) end with a ";". Under no circumstances should it end with a ".".
Some database systems allow upper and lower case in table names and field names. If you want to take advantage of this, you must ensure that the spelling of names is correct. To enable entry of lower case letters in names in the ABAP/4 editor, you must set the attribute for upper/lower case in the report.
Since there are no arrays in ABAP/4 , array operations are not possible in Native SQL . If the result of a SELECT command is a table, you can read this table line by line either with the
Native SQL command FETCH or with the addition ...
PERFORMING form .
Unlike in ABAP/4 programs, the character " in a Native SQL statement does not introduce a comment until the end of the editor line.
Addition
... PERFORMING form
Effect
If the result of a SELECT command is a table, you can read this table line by line in a processing loop. The subroutine form is called once for each line. In this subroutine, you can leave the loop by using EXIT FROM SQL . If the result of the selection is a single record, the subroutine is called only once.
Example
Display a section of the table AVERI_CLNT :
DATA: F1(3), F2(3), F3(3).
F3 = ' 1 '
EXEC SQL PERFORMING WRITE_AVERI_CLNT.
SELECT CLIENT, ARG1 INTO :F1, :F2 FROM
AVERI_CLNT
WHERE ARG2 = :F3
ENDEXEC.
FORM WRITE_AVERI_CLNT.
WRITE: / F1, F2.
ENDFORM.
RELATED POST
SAP ABAP SYNTAX FOR ELSE AND ELSE IF
SAP CRM Technology Overview
Analytical SAP CRm Overview
SAP CRM Solution Monitoring
CRM Backup Restoring System
No comments :
Post a Comment